Stewmac 3M Stikit Gold Abrasive 800-Grit Roll Self-Adhesive

Description: 3M Stikit Gold Abrasive Roll 800-grit for Fretbar Understring Leveler, 1" Width, 13.5m LengthNow you can level your frets... with the strings switched on! Matt Brewster of 30th Street Guitars shared this amazingly simple (but effective) idea for how to dress perfect frets while the strings are still on the guitar. This great idea became the StewMac Fretbar® Understring Leveler. This revolutionary new tool allows you to level your frets under full tension without removing the strings. It is designed for use with 1" wide 3M Stikit Gold abrasives to enable ultra-fast setup and leveling.Edit frets without guessworkWith the fretbar you can adjust the frets to exactly the tension that the neck has when playing. This is because the fretbar fits UNDER and BETWEEN the strings while the guitar is tuned to pitch. The precision ground surface is only 2mm thick, allowing you to slide under the strings when leveling. Because the neck is under tension, you can clearly see every hump, every twist, every high or low spot. The Fretbar allows you to level the frets without any worries or "surprises" popping up after the work.There is a Fretbar for every leveling job:- The length of 11.5 cm is ideal for selectively leveling problematic frets along the entire neck. It is also perfect for creating fallaway on acoustic guitars.- The length of 23 cm is intended for smaller necks such as ukuleles and mandolins. It is also suitable for leveling full scale necks and for point leveling.- With a length of 46 cm, an entire neck can be easily leveled. This allows most frets to be leveled quickly and evenly without risk of damaging the nut, saddle or hardware.A string lifter for use with the fretbar is included. Place the jack in front of the saddle to raise the strings without changing the tension of the neck.Works even with removed stringsThe fretbar is also a great all-around tool for aligning frets. With or without strings, the precision-ground surface works quickly and precisely to level the frets. Whether you're just starting out or have a lot of experience, the Fretbar is a great option for all your fret work.Built for a lifetime of use:- Made from durable extruded 6061 aluminum- Guaranteed accuracy of ±0.0015" per foot- Designed for 2.5 cm wide 3M Stikit Gold abrasives- Works with threads on or off- Your fastest and most profitable leveling ever- Since you don't have to remove or replace the threads, you save time on every leveling job.Each fretbar is 3/4" (19 mm) wide and 1-15/32" (37 mm) tall, constructed from extruded aluminum and available in three lengths: 4.5" (114 mm), 9" (228 mm), and 18" (457 mm).Also works with stainless steel frets!All our tools are suitable for use on stainless steel fret wire. Modern stainless steel fret wire is known to be harder than the traditional nickel-silver blends, but our own experience in the workshop shows that the wire does not cause premature wear of files or sandpaper.The 1" width fits instantly (and neatly!) onto the StewMac Fretbar saddle. You no longer have to spend time making a straight cut and then throwing away what you don't need. Take exactly the length you need, attach it to the fretbar and you're ready to go. Stikit abrasives cut like a file and last longer than regular sandpaper. The sharp aluminum oxide grain also does not become loaded with grinding dust as quickly. Stikit abrasives are characterized by high durability and performance.Make your own grinding jigsThis smaller size makes it easy to attach to repair magnets, micro-mesh foam sanding blocks, and any new contraption you can think of. Now you can easily reach every corner, every neckline and every tight spot!Stikit is suitable for use on stainless steel fret wire. Modern stainless steel fret wire is known to be harder than the traditional nickel silver wire, but our own experience in the workshop shows that the wire does not cause premature wear of files or sandpaper.Each roll is 15 yards (45 feet/13.71 meters) long.Seen cheaper somewhere else? No problem - send us your price proposal!+++3 years warranty+++All our items come with a 30-day no-hassle return policy. Justification. Sheet music, reading material and software cannot be exchanged. The general terms and conditions of Zoundhouse GmbH & Co.KG apply.For the out-of-court settlement of consumer disputes, the European Union provides an online platform (ODR platform) athttps://ec.europa.eu/consumers/odrWhen purchasing multiple items from us:Add the items to your shopping cart and select Request total from buyer at the top right.If you intend to buy multiple items: Put them into your shopping cart and choose combined shipping(up right)on your checkout.Now you can level your frets... with the strings switched on! Matt Brewster of 30th Street Guitars shared this amazingly simple (but effective) idea for how to dress perfect frets while the strings are still on the guitar. This great idea became the StewMac Fretbar® Understring Leveler. This revolutionary new tool allows you to level your frets under full tension without removing the strings. It is designed for use with 1" wide 3M Stikit Gold abrasives to enable ultra-fast setup and leveling. With the fretbar you can adjust the frets to exactly the tension that the neck has when playing. This is because the fretbar fits UNDER and BETWEEN the strings while the guitar is tuned to pitch. The precision ground surface is only 2mm thick, allowing you to slide under the strings when leveling. Bec See also this products: STEWMAC 9 10/12ft Stikit Gold Sanding Medium 80-grit Rolle Self Adhesive STEWMAC 9 10/12ft Stikit Gold Sanding Medium 220-grit Rolle Self Adhesive STEWMAC 9 10/12ft Stikit Gold Sanding Medium 320-grit Rolle Self Adhesive STEWMAC 9 10/12ft Stikit Gold Sanding Medium 400-grit Rolle Self Adhesive STEWMAC 9 10/12ft Stikit Gold Sanding Medium 120-grit Rolle Self Adhesive STEWMAC Stikit Gold Sanding Medium 600-grit Rolle Self Adhesive STEWMAC SM0335 Bundabrichtfeile STEWMAC Fret Kisser BREXIT information for UK customers: DHL will take care of all the official paperwork and payment of the VAT on your behalf and they will pass that cost to you on their invoice.From our limited experience so far, the government charges consist of 20% VAT plus a small amount for the paperwork involved (usually around 2.5%).

Price: 37.71 USD

Location: Dresden

End Time: 2025-01-14T15:51:38.000Z

Shipping Cost: 14.39 USD