PS3 FAT YLoD FIX Replacements NEC/TOKIN 470uF 6.3V SMD Tantalum Capacitors KEMET

Description: Playstation 3 FAT/PHAT NEC / TOKIN replacement capacitor rated at 470uF 6.3v Use this to fix your PS3 YLOD 'Yellow Light of Death' DON'T BUY CHEAPLY MADE CHINESE NO NAME CAPACITORS! These are made by Kemet. The pictures posted on here were taken by myself of the actual ones I am selling! WHAT YOU SEE IS WHAT YOU GET!!! If you would like to buy more than 32 please contact me with an inquiry telling me you many you are looking to purchase and I will get back to you with a quote for how much. ***I have personally used these for this and I can say I do recommend these ones that I am selling...*** ***If using for Playstation 3, please read this article at PSX Place to get yourself familiarized with the procedure!!! Full Guide: https://www.psx-place.com/threads/research-experimental-nec-tokin-capacitors-replacement-ylod-fix.25260/ Usually, replacing one set of these near the RSX chip will resolve the issue but if not, more replacements may be needed. One replaced capacitor from the PS3 will require 4 of these capacitors. That is why they are sold in units of 4.There are a total of 8 capacitors in the PS3 that can go bad. Purchase a set of 32 (4x8) if you want to replace them all and ensure the longevity of your system. The NEC/TOKIN SMD Capacitor was manufactured by NEC "Formerly known as NEC/TOKIN", which its responsible for the current filtration and conversion, in order to stabalize and give the necessary current to the needed components. These capacitors were used by Sony until the 65nm CELL/RSX manufacture era, due to they´re size and compact mounting space required, it could easily replace 4/6 Capacitors required to give the same uF "Micro-Farat" output, in a single package, these capacitors was used by other manufactures not just Sony, in a variety on PCB appliances such as Laptops/DVD Players between others, these Capacitors are notorious for failure due to the age/use and heat, thus loosing they´re original capacitance to a point they wont provide the necessary current anymore. Reballing/Reflowing and the Hair-Drier only worked,because by heating the area to remove/reflow the CELL/RSX, you were not fixing the BGA with heat,but the action of heating the chips, where heating the NEC/TOKINs themselfs, thus restoring they´re original capacitive properties of the NEC/TOKINs,but depending on the amount of heat used, either it could last between a day to a few years. ***DISCLAIMER - Do this repair at your own risk, i am not responsible if your PlayStation3 catches fire or blows in a Thermo - Nuclear fashion, proceed with the upmost extreme caution, read the instructions carefully, and good luck! WE WILL NOT ACCEPT RETURNS OR REFUNDS FOR ANY COMPONENT THAT HAS TOUCHED SOLDERIF YOU NEED A RETURN, CONTACT US BEFORE YOU TOUCH A SOLDERING IRON *TOOLS - What you will need? *Soldering Iron - "Small/Thin tip recommended" *Soldering Flux *Tantalum Capacitors "330/470uF - 2.5v/6.3v " *Soldering Skills *Knife *Compatible Models: *Phat Models: "470uF" *DECR-1000 - "TMU-520" *DECHA00A - "COK-001" *CECHA - "COK-001" *CECHB - "COK-001" *CECHC - "COK-002" *CECHE - "COK-002/W" *CECHG - "SEM-001" *CECHH - "DIA-001" *CECHJ - "DIA-002" *CECHK - "DIA-002" *CECHL - "VER-001" *CECHM - "DIA-001" *CECHP - "VER-001" *CECHQ - "VER-001" *DECR-1400 - "DEB-001" IF YOU ARE UNSURE ABOUT ANYTHING BEFORE YOU PURCHASE PLEASE SEND ME A MESSAGE AND ASK ME! I AM MORE THAN HAPPY YOU HELP AND ANSWER ANY QUESTION YOU MAY HAVE!

Price: 9.99 USD

Location: Revere, Massachusetts

End Time: 2024-09-11T20:01:28.000Z

Shipping Cost: 0 USD