Description: Parallel 12 PowMr 60A MPPT Solar Charge Controller 12V 24V 36V 48V MAX PV160v 60A MPPT Solar Panel Regulator Charge Controller DC12/24/36/48V Auto Advantages: ❶【Software Update MPPT Design 】100% MPPT 60A solar charge controller Intelligent, Max efficiency ≥98.1%, PV utilization ≥99%. Built-in DSP controller with high performance Automatic battery voltage detection 12V/24V/36V/48V, Make sure batteries' voltage more than 12V to boost controller and make sure battery has enough power to Self-detection when connected to the controller. ❷【Multiple Battery Adaptation】 Fit for USER(can be set Lithium, Lifepo4, Li(NiCoMn)O2)/Vented/Flooded/Sealed/Gel/NiCd battery. User programmable for absorption voltage/Floating voltage/Low voltage disconnect./Load Timer. Real-time energy recording. Two connectors for each pos and negs on solar and batteries connectors. copper wires:9AWG. ❸【Full System Protection】Backlight LCD Dispaly PV voltage/output power/Battery voltage/charging current/working mode/Temperature. ☀ TROUBLESHOOTING function and LCD display and can help users not only check the whole system operating data and statuses but also quickly identify system faults and modify parameters. ❹【Fan Heat Dissipation】Intelligence Fan-on temperature >45℃ and off < 40℃,Porous heat dissipation.and fan use BEARING technologies increase life UP TO 5000hrs in normal use. Suitable for RVs, Commercial Vehicles, Boats, Yachts, and Solar system. ❺【Notiction】If you use sealed lead acid, vented gel battery, and etc, you donn't need to set any parameters, the controller can adjuste automaticly and work normally; but if you use lithium batteries, you need to properly adjuste parameters according to the actual voltage of the battery, becauese the voltage of lithium batteries is unstable, such as acid battery 12V is 12V, lithium battery 12V may be 11.1V or 14.8V. You can Put two pieces 60A in parallel ,So total is MPPT 120A. Parameter Feature: ⚫ Integrated Charging Presets ⚫ Versatile Application ⚫ Multi-Stage Charging Algorithm ⚫ Maximum Power Point Tracking (MPPT) Technology ⚫ High-Efficiency Charging ⚫ Supports Up to 12 Units in Parallel ⚫ Adaptive Boost Charging ⚫ Durable and Secure ⚫ External Temperature Probe Configuration ⚫ Forced Air Cooling ⚫ Lithium Battery Activation Warning: Do not charge lithium batteries when the temperature is below 0°C. Specification: Models HHJ-60-PRO Solar Input Parameters Max. Solar Array Open-Circuit Voltage 160V Maximum Input Power: For 12V System 720W For 24V System 1440W For 36V System 2100W For 48V System 2800W Input Voltage Range: For 12V System 20V~80V For 24V System 37V~105V For 36V System 50V~160V For 48V System 72V~160V Battery Charging Parameters Charging Technology MPPT Charging Algorithm 3 stages Battery Voltage Auto-Detection 12V System DC9V~DC15V 24V System DC18V~DC29V 36V System DC30V~DC39V 48V System DC40V~DC60V Overcharge Protection Voltage 60V Charging Limit Current 61A Maximum Efficiency ≥98. 1% Solar Utilization Rate ≥99% Load Terminal Output Rated Output Current 6A Maximum DC Output Current 8A Protection Temperature Protection 75℃ / 167 ℉ Fan Start Temperature >45℃ / 104℉ Fan Shutdown Temperature <40℃ / 95℉ General Specification Dimensions 215x130x85mm /8.46x5.12x3.35in Net Weight 990g / 2.18lb Electromagnetic Compatibility EN61000, EN55022, EN55024 Protection Level IP21 Operating Temperature -20℃ ~ +55℃ / -4℉ ~ 131℉ Storage Temperature -40℃ ~ +75℃ / -40℉ ~ 167℉ TIPs Always connect battery first!!! Make sure enough batteries’ voltage let controller recognize the right system voltage. The disassembly sequence is contrary to the wiring order. NEVER connect the solar panel array to the controller without a battery DO NOT connect any Inverter/ wind/ Alternator or Charger into the charge controller! connect the Inverter directly to the battery. Ensures solar input voltage higher 3V or more than batteries’ voltage and total input power in the range. if input power is too low for max input power, it may be appears to have been discontinued., the charging current almost be zero when controller is floating charge. Parameter Setting RulesFloating voltage > Low voltage reconnect > Low voltage discharge. The solar controller will stop output when the battery under 10.7V. The LCD will be blank when the battery under 8V and it will re-output when the battery up to the 12.6V (adjustable). Install the Charger controller to the battery as close as possible. Tighten the wire, Carefully read battery manuals before operation. When controller makes buzzing sound because of It's working hard to dissipate heat for your controller. Rest your heart, it will be stop when temperature return to normal. Remove all the debris around the controller ( leaving a space of approx. 5.91in ).Make sure all connections going into and from the controller are tight. Do NOT let the positive (+) and negative (-) terminals of the battery touch each other. Package include 1x 60A MPPT solar controller 1x user manual 1x Mounting caps1x Screws POWMR EVERYWHERESHIPPING POLICYRETURN POLICYABOUT USCONTACT US
Price: 88.99 USD
Location: Rowland Heights, California
End Time: 2024-08-19T03:21:48.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Voltage Input: 48V System: Dc72v~Dc160v
Custom Bundle: No
Type: MPPT Charge Controller
Overcharging protection voltage: 12V system (15V)24V system (30V)36V system (45V)48
Automatic temperature compensation: 14.2V-（Max temperature-25 centi-degree）*0.3
Output voltage ripple-peak: 100mV
System voltage automatic recognition-2: 36V system (DC30V-DC39V) 48V system (DC40V~DC60V)
controller: controller
Charging: 3-stage：constant current(MPPT), constant voltage(A
System type: DC12V/24V/36V/48V Recognition automatically
System voltage automatic recognition: 12V system (DC9V-DC15V)/24V system (DC18V-DC29V)
Selectable battery type(default is Seale: Vented/ Sealed / Gel / NiCd / Lithium battery(defi
Current Output: 60A
Current Type: AC/DC
System Configuration: Hybrid
Application: Agriculture/Farming, Aquaculture, Automotive, Back-up Power, Camping/Hiking, Commercial, Electronics, Home/Garden, Irrigation, Marine, Municipal, Pool, Recreational Vehicle (RV), Shed
Features: Flexible, Temperature Control
Color: Gray
Unit Type: Unit
Power Source: Solar
MPN: MPPT60A
Brand: PowMr
Recommended Environment: Mppt Charge Controller
Charging Mode: Mppt Maximum Power Point Tracking Automatically
Voltage: 48 V System: Dc72v~Dc160v, 48 V, 48V system: DC72V~DC160V
Model: MPPT-60A
