OBD2 Breakout Box Auto OBDII Protocol Detector Car Diagnostic CAN Test Scan Tool

Description: OBD2 Breakout Box with LED Light Indicator OBD2 16Pin Breakout Box OBD2 Protocol Detector Car Test Diagnostic Tool Automotive Breakout Box Auto OBDII Breakout Box for Use with Multimeter OscilloscopeWe provide a free return label for all our products to ensure hassle-free returns. To receive this, please contact us before initiating a return request. We will assist you in obtaining a free return label. If you are not 100% satisfied, you can return the item for a full refund or a replacement. Please note that the free return label is only available for return requests submitted as selecting "CHANGE MY MIND" or "ORDERED BY MISTAKE". Keep this in mind when submitting your return request to qualify for the “FREE RETURN LABEL”. Thank You.PRODUCT DESCRIPTION【Detecting Communication Protocol, Power Supply and Grounding Circuit】This is a professional automotive tool for the OBDII diagnostic link connector which offers easy access to the OBDIl connector for monitoring signals of protocol, power and grounds conveniently and safely. When unconfirmed signals are detected, the breakout box can also be connected to a multimeter or oscilloscope for further testing.【LED Indicators】The LED lights on the OBD2 breakout box can quickly indicate whether the power and grounding of the OBDII interface on the car are normal. Yellow LED (Pin 2/6/7/10/14/15) lights up to show communication with a scan tool and protocol identification; Green LED (Pin 4/5) lights up to indicate good ground. The Red LED (Pin 16) lights up to show there is power.【16 Pin OBD Interface】The input jack layout simulates the 16-pin layout of the OBDII interface, making more tests quick and intuitive. All 16 pins of OBDII can be easily connected when the decoder communicates with the vehicle. This OBD2 breakout box provides easy access to the vehicle data bus lines.【90CM Extension Cord】The OBDII connector extension cable adopts multithreading data connection technology, which makes the connection faster and smoother. The cable body is made of elastic thermoplastic TPU material, which has the characteristics of high elasticity, high strength and high resilience.【Standard 4MM Rubber Socket】The OBD2 breakout box uses safe banana sockets, and the built-in input jack can be connected to any type of 4mm banana plug, including those with safety sheaths, making it easier to connect the breakout box to a multimeter or oscilloscope.【24-Hour Service 】We provide 24-hour friendly customer service. If you have any questions about this OBD2 breakout box, please feel free to contact us and we will provide you with a satisfactory solution as soon as possible.Pins DefinitionPin 1/Pin 3/Pin 8/Pin 9/Pin 11/Pin 12/Pin 13: OEM Discretionary.Pin 2: SAE-J1850 PWM PROTOCOL LINE(+).Pin 4: Chassis Ground.Pin 5: Signal ground.Pin 6: CAN High (ISO 15765-4 and SAE-J2284).Pin 7: K-line for ISO 9141-2 and ISO 14230-4.Pin 10: SAE-J1850 PWM PROTOCOL LINE(-).Pin 14: CAN Low (ISO 15765-4 and SAE-J2284).Pin 15: L-Line (ISO9141-2 and ISO 14230-4).Pin 16: Battery +Product ParametersDiagnostic port: OBD II.Working voltage: DC 8V-30V.Load: 2.0A.Operating temperature: -20°C-70°C (-4°F-158°F).OBD II extension cable length: 90cm.Important HintThis product is directly connected to the vehicle data link.Do not use this product to connect a load device with a power exceeding 1 ampere.Do not directly short-circuit the 16th pin, the 4th pin, and the 5th pin of this product.When you are not sure whether your operation will cause problems, please stop using this product immediately.When you are not sure about the electrical circuit on the car, do not use a jumper to short-circuit the input jack of this product.Improper use may damage the vehicle data communication system, related circuits or systems.This is a professional automotive test tool for the OBDII diagnostic link connector which offers easy access to the OBDIl connector for monitoring signals of protocol, power and grounds conveniently and safely. Can be used with multimeter or oscilloscopeWhen unconfirmed signals are detected, the breakout box can also be connected to a multimeter or oscilloscope for further testing. Red LED (Pin 16)Light up to show there is power.Green LED (Pin 4/5)Light up to show ground is good.Yellow LED (Pin 2/6/7/10/14/15)Light up to show communication with a scan tool and protocol identification. PRODUCT REAL PHOTOS: 🛍️ SHOP WITH CONFIDENCE - HERE'S WHAT YOU NEED TO KNOW: 💰 Payments can be made using your usual method. We accept all payment methods provided by eBay. 📦 Orders are checked before dispatch and usually shipped within 1-5 business days. 🚚 Delivery time is typically 2-7 business days, so please ensure your shipping address is correct before making a purchase. 🔄 We accept returns within 30 days of item arrival. If there's any issue with your item, please contact us first. We'll respond within 1 business day. 👍 Our top priority is providing the best customer service. If you're happy with your purchase, we'd appreciate positive feedback. If you have any concerns, please contact us before leaving negative feedback. 💬 Contact us any time through eBay messages with questions, comments, or product requests. We'll respond within 24 hours and do our best to help you out! 🛒 Check out our store for more items. Thank you for visiting!

Price: 39.99 USD

Location: United States

End Time: 2025-01-11T11:33:31.000Z

Shipping Cost: 0 USD