Description: Made in the UK by Renishaw. This is a NEW Renishaw PCH10-3 Plus CMM Probe Head Controller. Model #: PHC10-3 A-5863-0100 Serial #: 4Y4M49 Product Date: Feb 15, 2023 PHC10-3 PLUS head controller receives instructions from the CMM control. The PHC10-3 PLUS controls all head functions and reports system status to the CMM: Drives PH10 PLUS (PH10T PLUS, PH10M PLUS or PH10MQ PLUS) to position - sent either from the HCU2 or CMM Checks and reports position Flags up errors, e.g. failure to reach position, obstruction before or after locking etc. The PHC10-3 PLUS does not process any of the probe sensor signals. These are railed clean through the heads axes and controller to the probe interface. SPECIFICATIONS: Length: 180 mm Width: 440 mm Height: 44 mm Weight: 1.5 kg Data transmission: RS232 or USB Current consumption (at 240 V): Less than 1 A PSU electrical ratings:Supply voltage: 100 V to 240 V +/- 10%Frequency range: 50 Hz to 60 HzPower consumption: 49 W max.Transient voltages: Installation category II Input connectors: 15-way 'D' Power supply: 24 Vdc 49 W provided by the Emerson PSU (DP4024N3M) power adaptor Probe output connectors: 7-pin DIN or 9-way 'D' type Maximum cable length:RS232: 50mUSB: 5 m (extendible in lengths of 5 m by use of a hub, to a maximum length of 30 m) Comes exactly as shown in pictures. LOCAL PICKUP AVAILABLE @ 1520-A INDUSTRIAL PARK ST. COVINA, CA 91722. HABLAMOS ESPAÑOL. LOC: SH48
Price: 1979.99 USD
Location: Covina, California
End Time: 2024-02-13T23:42:39.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Renishaw
MPN: PHC10-3 PLUS A-5863-0100
Country/Region of Manufacture: United Kingdom