Furnace Fan Blower Assembly- NEW 240 Volt Motor Installed- Electric Air Handlers

Description: THESE ARE FURNACE BLOWER ASSEMBLIES, REMOVED FROM CENTRAL HEAT AIR HANDLERSCOMES WITH A BRAND NEW MOTOR INSTALLEDTHESE ARE FURNACE BLOWER ASSEMBLIES, REMOVED FROM CENTRAL AIR GAS FURNACES.WE WILL HELP YOU WITH TECH SUPPORT AND SIZING TO GET YOU THE RIGHT BLOWERWE HAVE A WIDE VARIETY OF BLOWER ASSEMBLIESJust send us a message with your:Intended use for the blowerIf you need a specific size, please provide:Width (flat surface to plat surface)Outlet opening width (should be the same as blower width) and lengthBlower height and length 230-240 VOLT UNITS SQUIRREL CAGE, MOTOR, AND HOUSING ASSEMBLY VERY POPULAR FOR USE AS SHOP FANS AND VENTILATORS 230 VOLT FOR EASY PLUG-IN WIRING I HAVE SEVERAL, YOURS WILL VARY FROM PICTURE MOST ARE 3 TO 5 TON (AC) SIZE NEED A SPECIFIC SIZE TO REPLACE YOUR EXISTING FURNACE ASSEMBLY? CONTACT ME WITH OPENING DIMENSIONS, AND I'LL MATCH AS CLOSE AS POSSIBLE. RUN TESTED AND WORKING GOOD REPLACEMENT BLOWERS FOR THOSE LOOKING FOR A BLOWER TO REPLACE YOUR EXISTING HEATERS TECH TIP; MATCH THE WIDTH, MATCH THE BLOWER TYPICALLY, ALL BLOWERS HAVE THE SAME DIMENSIONS, EXCEPT AS THE BLOWER GETS BIGGER, IT GETS WIDER ( flat to flat surface) MOST ALL BLOWERS HAVE AN AIR OPENING THAT IS 9 TO 12 INCHES LONG. BUT THE AIR OPENING WIDTH, WHICH IS THE SAME AS THE BLOWER HOUSING WIDTH, IS ABOUT 8 INCHES IN A 2 TON, 50,000 BTU FURNACE BLOWER, GOES TO 13 to 15 INCHES IN A 125,000 BTU, 5 TON BLOWER. THE RADIAL DIMENSIONS GET A BIT LARGER AS THE BLOWER GETS LARGER, TOO PLEASE PROVIDE THE OLD BLOWER WIDTH, SO IT CAN BE MATCHED AS CLOSE AS POSSIBLE. BLOWERS WITH MATCHING WIDTH HAVE MATCHING CFM CAPACITY, SO A SIMILAR WIDTH BLOWER WILL WORK. THE REPLACEMENT BLOWER MAY NOT BE EXACT, SO SPECIAL MOUNTING MAY HAVE TO ADDED TO SECURE THE BLOWER

Price: 249 USD

Location: Leander, Texas

End Time: 2023-12-26T16:12:18.000Z

Shipping Cost: 29 USD