Description: DescriptionThe CRX-10iA Collaborative Robot with a 10kg payload, 1,249mm reach and unique under-flip motion renders it a perfect solution. Does not include installation, set up, end effector, or pedestal. FREE ONLINE TRAINING AVAILABLE AT FANUCAMERICA.COMEquipped With• IP67 water/dust proof rating of the upper/lower arm• All axis brakes• Rear cable exit with 4m no-flex disconnectable type robot connection cable• Mechanical unit cable with:• Tool I/O connector at J6 with 2/2 Inputs/Outputs (PNP or NPN type), Configurable Power(24VDC/12VDC/OFF), Ground, RS485+/- or 2 Analog Inputs (Configurable)• EE connector at J6 with 3/4 Inputs/Outputs (PNP type), 24VDC, 0VDC• 1 iRVision COAX port• 1 Air port• 1 ASAP port• Safety rated force / torque detection sensors for collaborative operationCE/NRTL Approved FANUC SYSTEM R-30iB Mini Plus Controller with:• Backplane 2 slot• Main Board B with:• CPU Standard (DRAM 1GB, I/O Link I slave)• 2 Ethernet Ports (10BaseT/100BaseTX)• 1 iRVision GigE Camera Port (10BaseT/1000BaseTx)• 1 Coax Vision Camera Port• 1 Miniwide Slot• 1 Mini Slot• 1 USB Port 2.0• 1 RS-232 Port or HDI port (provides up to 2 HDI inputs)• 1 Port for Conveyor Tracking (supports up to 2 x absolute encoders for conveyor tracking)• 1 User I/O Port (provides up to 20 digital inputs & 16 digital outputs, Fence Input, External Emergency StopInput and External Emergency Stop output)• 1 I/O Link master/slave Port (provides connection to FANUC I/O link devices- Model-A, FANUC CNC)• 1 I/O Link i master/slave Port (provides connection to DCS Safe I/O board)• 1 Switch Box Port (provides connection to optional remote switch box with cycle start, operator panel E-stop,Auto/T1 mode switch etc.)• 1 Safety Connector Port (provides connection to 2 x configurable general purpose safety inputs)• 6-Axis Servo Amplifier• CE/UL/CSA Breaker• 1-phase 110-120VAC or 200-240VAC input power• 2m 110-120VAC power supply cable with NEMA 5-15/20 plug• Tablet TP with TP base (Touch Screen, E-Stop Button, Safety 3-position Enabling Switch, USB port)• 5m Teach Pendant cable• Switch Box jumper connector plug• I/O Terminal Conversion Module inside Controller for External E-Stop, Fence, and general purpose peripheral I/Owiring (User prepares I/O and safety cable)• 1 Spare fuse kitFANUC LR HandlingTool Software with:• Constant Path (R663)• Corner Region (R654)• DCS Basic Position Check (J556) - (Note: Full DCS Position/Speed Check J567 is available as option)• DCS Safe I/O Connect (J568)• Payload Identification for CRX• R-30iB Mini Plus Controller (S526)• Tablet TP (S527)FANUC Product Documentation• eDocumentation is available online for all registered customers at crc.frc.com, under the Support/Downloads tab.• A Quick Start Guide is included with the robot for installation and setup.LR HandlingTool RTL-H551 1 Included Included1.4.2 English Dictionary RTL-H521 1 Included IncludedThis option provides English description of program names, comments, I/O descriptions etc. in standard Englishlanguage.1.4.3 FRA Params RTL-R650 1 Included Included1.4.4 Ethernet/IP Adapter RTL-R784The Ethernet/IP Adapter Software option provides an Ethernet I/O interface between a FANUC Robot and someRockwell (Allen Bradley) PLCs with EIP Scanner Option (eg. ControlLogix, CompactLogix). The Adapter option islike a slave and it requires a scanner in the I/O network to initiate communication. The Adapter option can not drivephysical devices such as EIP compatible relays or solenoids. Robots with the Adapter option can not communicatewith other robots with Adapter option. This option only allows communication of discrete I/O status over Ethernet.Ethernet/IP uses Allen Bradley protocol and compatible with Ethernet I/O of Rockwell PLC. EIP option supportsexplicit messaging in server mode.1.4.5 Mini Controller RTL-S526 1 Included Included1.4.6 Core Software V9.40 RTL-V940 1 Included Included1.4.7 TRANSCEND TS8GJF270M KE-0357-180 1 Included Included1.4.8 BRADY #000010 THT LABELCUSTOMTAGGO000000241O 1 Included Included1.4.9 R-30iB Software Install Guide MARGTSI8301161E 1 Included Included1.5 CRX ROBOT STARTUP GUIDE MARGGCRXR07201E 1 Included Included
Price: 35500 USD
Location: Rochester, Michigan
End Time: 2024-08-26T16:42:50.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: FANUC
Type: COBOT
Arm Reach: 1,249mm
Model: CRX-10iA
MPN: CRX-10iA
Payload: 10 Kg
Robotics Controls Type: Motion Controller
Construction Type: Handling
