Description: Machine was purchased about 10 years ago for our shop and it never got put to work. We purchased a few tool holders and did some basic turning operations and it was fully functional. Machine sat for 4 years with no activity, we decided the machine was not a fit as our shop doesn't do production turning. As we prepared and cleaned up the machine we powered it on at the main disconnect and attempted to turn on the CRT. We were getting no power to the monitor. Checked,contractors and fuses and didn't find anything obvious until i noticed an error light on the psu.(Fanuc Power Supply). We purchased a used replacement. Upon replacing the CRT powered right up but the battery in PSU was dead, as well as the backup battery source of the Machine (4, "D" batteries) Replaced those and lost machine memory. Did reboot and Manually entered the Parameters From our Hard copy which we received when purchasing the machine. After that process Machine is getting #300 APC errors for ZRO Return which i believe are normal, but also getting #750 Spindle Serial Link Error On Head 1. We looked into it briefly but nothing was resolved, with the code we weren't able to turn spindle "on" or move X, or Z Axis. My guess is its something small as machine worked before leaving it to sit for extended time. PSU lights up with green status lights alone with cards in slots 2,3 next to it. AC Servo amps display "ready" signal when control power applied. NC system is Fanuc MF-D6.(fanuc 16TT) Original Machine chuck was replaced with an 8" SMW Autoblock Chuck. MayFran (06M3966-1) Chip conveyor with Baldor 1/2 hp motor is included in sale. See photos for tooling that comes with the machine. Programming, Operation,Maintenance,Parts list manuals, Electrical Circuit Diagram, and Machine specific Electrical Documents are included as well. Machine is being SOLD AS IS, Buyer is responsible for All moving, rigging, loading. I will list out machine Specs below. If you have any questions we will try to answer them to the best of our knowledge. Capacity-Swing over bed (20.47)inch Swing over Cross slide (13.78)inch Between Centers ( 25.39)inchTravel-X Axis Turret 1 (6.30)inch Turret 2 (5.71)inch Z-Axis Turret 1&2 (23.23)inchSpindle-Number of Spindles-1 Spindle speed range (35-3500)RPM Type of spindle nose (JIS A2-6)Turret-Number of turrets (2) Turret type (Turret 1-10 station) (Turret 2- 8 station)Motor-Spindle drive motor (24.79/20)HPTank capacity- Hydraulic tank (10.56)gallons Lube oil tank (0.53)gallons Coolant tank Right (26.40)gallons Rear (38.28)gallonsMachine size-Max Height (75.71)inch Floor Space (224.80x135.24)inch Mass of machine ( 15840) lbs.
Price: 6000 USD
Location: Broadview, Illinois
End Time: 2025-01-01T18:04:34.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: MORI-SEIKI
Function: Turning
Control: CNC
Model Year: 1993
Machine Type: LATHE
Power Source: Electric
Max Spindle Speed (RPM): 3500
Voltage: 220 V
Model: ZL-25B5
Country/Region of Manufacture: Japan
