12V 100Ah LiFePO4 Lithium Battery With Charger For RV Solar Panel Off-Grid Motor

Description: 12V 100Ah LiFePO4 Lithium Battery with Charger 100A BMS Rechargeable Deep Cycle Lithium Battery For RV Solar Panel Off-Grid12V100Ah LiFePO4 Lithium Battery DESCRIPTION:✅ 10-year lifetime : We are committed to providing you with satisfactory-service. We provides 5-Year-after-service for this 12.8V 100Ah Lithium battery with responsive and satisfying customer-service. A proper solution will be provided to any problem within 24hrs for delivery, battery and problem during using and any other questions.✅ 12.8V 100Ah Lithium iron phosphate battery features: the dimension of 12.8V 100Ah battery is: L260*W168*H215mm, the max continuous discharging current is 100A. the inrush current is 200A within 3-5 seconds. charging voltage we recommend for 12.8V LiFePO4 Battery is 14.6V.✅ 100A BMS Protection: 12.8V 100Ah battery built-in upgarded 100A BMS (Battery Management System) to protect it from overcharge, over-discharge, over-current, and short circuit with excellent self-discharge rate. Built-in high-temp/ low-tem cut off prevents charging/ discharging When the temperature reaches a certain threshold value.Automotive Grade A LiFePO4 Battery Cells:We adopt Automotive Grade A Lithium iron phosphate battery Cells with higher energy density, more stable performance & greater power, and insist on providing customer with environmentally friendly green power solution. Highest grade of battery cell and authoritative accreditation enable ourbattery growing as LiFePO4 battery leader.✅ Capacity Expansion & Widely Use:12.8V 100Ah Lifepo4 Batteries support series or parallel connecting. Powerful energy expansion system could be widely used for home storage system (avoiding the effects of power outages), off-grid system, RV, Trolling Motor, Boat, Marine, trailer, and outdoor activities. Much more flexible to DIY your own battery system. FEATURES:1.Certificate: CE ROHS MSDS UN38.3 2.Upgrade Parts/Accessories: Grade A 3.Material: Lithium iron phosphate 4.Max continuous charge current: 1C(100A)5.Recommeded charge current: 0.2~0.5C(20A~50A) 6.Max continuous discharge current: 1C(100A) 7.Peak discharge current: 2C(200A) in three to five seconds 8.Voltage: 12V 9.Maximum protection voltage: 14.6V 10.End Voltage: 10V11.Rated capacity: 100Ah/1280Wh 12.Terminal: M813. BMS: 100A 14.Charging temperature: 0℃-45℃ 16.Discharge temperature: -20℃-60℃ 17.Storage temperature: -10℃-50℃18. Store at ≥50% Capacity, Recharge Every 3 Months19. Battery size: 332*176*220mm(L*W*H)20.Item weight: about 9.7(±0.3)kg Package list：1 x 12V 100Ah SCREMOWER LiFePO4 Battery1x14.6V 7A battery charger1 x Manuel Note: battery charger is included . Matters to note when using. 1. Please fully charge the batteries before connecting in series and parallel. 2. Maximum support 4 battery packs in series, more than 4 batteries may be permanently damaged. 3.Prohibit reversing the positive and negative terminals, reversing the terminals may damage the battery. 4.Prohibit charging over the maximum charging current, over this current may cause permanent damage to the battery. 5. Prohibit exceeding the maximum discharge current discharge, exceeding this current may cause permanent damage to the battery. 6. Prohibit exceeding the charging voltage to charge the battery Tips： 1. To connect in series or /and parallel, batteries should meet the below charging/ discharging voltage). As there are subtle differences in the conditions: a). identical batteries with the same battery capacity (Ah) and BMS (A); b). from the same brand (as lithium battery from different brands has their special BMS) c. purchased in near time (within one month). 2.Restriction for parallel and series connection: Up to 5 identical batteries for serial connection up to 60 V and no limit for parallel connections(12V battery). Up to 3 identical batteries for serial connection up to 60 V and no limit for parallel connections(24V battery). 3.Two necessary steps before connecting:These two steps are necessary to reduce the voltage difference between batteries, and through these, the battery system can provide the best of it in series and/or parallel. Step 1: Fully Charge the batteries separately. Step 2: Connect the batteries one by one in parallel and leave them together for 12-24h. And then you can connect your batteries in series and/or parallel. 4.Or if you need to load and unload them together, the following steps should be taken: A: Fully recharge the batteries separately before the first connections. B: Disconnect the connections among the batteries and recharge the batteries separately once a month. C:If there is slight voltage difference among batteries during series use, please read page 38 of the manual.

Price: 167 USD

Location: Los Angeles, California

End Time: 2024-10-13T08:36:40.000Z

Shipping Cost: 0 USD